Technician Class Ham License – On-Line Help for Your Self Study

You may have been redirected here from www.ke0og.net/training. You’re in the right place!

“…the best way to prepare for a test might be to master the material it purports to cover, rather than amassing a series of tricks and hacks around the act of test taking.” – Jason Tanz, Wired, 2 Jun 2015

Studying for your Ham Radio License

The Technician License is the gateway to amateur radio. And it’s within your reach—easily! Watch this short video to learn how. It tells you what self-study book to buy, where to get it, how to study it, and takes you through the introductory chapter.
See what other people think of this approach!

Guided Self Study

Although the book is self study, sometimes it’s helpful to have a guide. Out here where I live in Southwestern Colorado, there aren’t very many people, let alone hams! That’s why I’ve created this video guide to your self study. It’s in convenient chunks of short videos followed by short sections of self study. Enough — let’s watch the video!

The links I talked about

The ARRL Ham Radio License Manual, (Fourth Edition) is a mandatory adjunct to this course. In fact, it is the course! These videos give you an overview of the sections you’ll be studying, along with a few videos of how things actually work. Each video introduces a section of the Manual, which you then study. Try out the test questions, then come back for the next video.
You can get the manual using the following advertisement from Amazon.
It’s the same price there as from www.arrl.org, but at Amazon it qualifies for free shipping, which will save you several dollars.

Wherever you see a mouse symbol in the manual, you can go to www.arrl.org/ham-radio-license-manual for more information.

If you have a question about any section, simply post a comment on YouTube under that particular video. Or, use this link to this website’s question page: Ask Dave. Others may have the same question! I’ll post my reply to every question.

All the videos

All the new videos listed below have a direct link to YouTube. You can use your browser’s “back” button to return to this list. The videos are numbered the same way the sections are numbered in the license manual. Good luck! (As an aside, all of these videos are available on a YouTube Playlist shown below the video list.)

YouTube Playlist

By popular demand, here are all the Tech videos in an ordered playlist:

What do you do when you’re ready to take the test?

Go to www.arrl.org/exam_sessions/search, enter your zip code, and search for one in your area. Good luck!

Yes I want your comments!

No instructional course is ever complete, nor is it perfect. Please comment! Please put the comments right on the same post as the video you’re commenting about. Don’t worry, I see them all!

Have fun!

There’s probably a ham radio club near you. Go to www.arrl.org/find-a-club to locate a club near you. Attend their meetings and introduce yourself. You’ll find yourself instantly among friends. And your new friends can provide assistance as you study for your test. After you pass your test, they can help you get on the air, too. Enjoy!

The audio from the title page

I’ve had a request for the audio that accompanies the title in each video. It’s quite a mishmash of several recordings. I rendered it out as a single file, which you may listen to by clicking near the very left of the audio player (it’s black on black, for some reason).
Or you may download it by right clicking on this: Technician Video Start Audio and selecting the appropriate item to save the file (for Chrome it’s “Save Link As…”). Never fear, if you accidentally left click on it, just use your browser Back button to return to this page.

60 Responses to Technician Class Ham License – On-Line Help for Your Self Study

  1. jeremy says:

    Mr. Casler,

    I took my tech exam today and passed. Thank you so much for passing on your knowledge and experience. I listen to your video on my drive to and from work. They are an outstanding resource to anyone. Keep them coming.

    73
    Jeremy

  2. Hon Gerald Sukenic says:

    want to study for technician 1 license on-line

  3. Dave says:

    Fred, thanks for your comments. The TYT UV8000E seems to be a nice radio. I was impressed with it while reviewing it, with, of course, the exception of the manual and the cable with the down-level Prolific chip. You can use this link (click here) to buy the radio in such a way that I get a small part of it. With regard to a base rig, I use a Yaesu FT-7800. It’s a very simple dual-band 50-watt analog radio. The current version is the FT-7900. Good luck! 73, Dave

  4. Fred Cox says:

    Thank you for the videos for the Technician Class Ham License! I watched all of them before obtaining the book, so I know that was out of order. However, the videos encouraged me to believe learning the material was something I could do and enjoy doing as well. So, I got the book and studied it. I took the exam today and got all the answers right. Now I’m revved about going for the General Class license. This time, I plan to watch your videos in sync with studying the book, as prescribed. I have found your presentations and especially your demonstrations of the equipment and operations very interesting and helpful. So, thank you again for putting all of this together.

    I now need to obtain a radio. I have checked out your review of the TYT UV8000E. I tried clicking on the link on your page to the site for buying one, but the link did not work. So, you may want to check that out. I’ve also seen mention of a TYT UV8000SE, but I don’t see it available anywhere. Did that turn out to be a failed product?

    Do you have a recommendation for a first-timer’s multi-mode base station? I’m starting to learn CW and would like something that supports that mode for sure.

  5. Dave says:

    Hi Ed, the three DVDs together cover the existing Technician videos only (it takes 3 discs to hold all the tech videos). The Tech material has changed very little since these videos were created, but you are correct that they were created for the 2nd edition of the ARRL License Manual, which was replaced on July 1st, 2014 with the third. The videos do not cover the general and amateur extra class license manuals. I am currently updating the Amateur Extra videos to match the 11th Edition of the manual. I’m putting up several a week. I’m toying with putting those on DVD when I’m finished. It will likely take more than 3 discs, though! Hope that helps. 73, Dave

  6. Ed Harwood says:

    Hello Dave,

    My question is, are the DVD’s for all classes of licenses up to date with the new question pools? I have looked at some of the videos and they are not. I don’t want to get old material. If everything is up to date then I want all 3 sets of the DVD’s.
    Thank you,
    Ed Harwood, W5CVE

  7. Dave says:

    Marvin, please feel free to use the videos during your class. If you don’t have Internet service where you’re teaching the class, you can get the entire set of Tech videos on DVDs (click here). Good luck with your classes! 73, Dave, KEØOG

  8. Marvin Soskin says:

    Hello Dave, I’m a newer ham and (along with a few others) trying to get a technician class going and would like to possibly use your videos as part of the curriculum. Even if we don’t use them in our class your website will be the first thing I inform my students about. I used your videos as intro’s to the sections presented by the ARRL books and found them to be helpful understanding the concepts. Thank you for all the work you do putting your website together and offering these videos.
    73, Tom W6MTS

  9. Jay Bissonnette says:

    Hi Dave,
    Just wanted to let you know watched you video’s and took practice exam’s on the ARRL and eham sites over the course of a week. I took the Technician exam last night passed with only 1 incorrect answer. Just waiting for my call sign now. Thanks I’ll be watching the rest of your video’s for the next 2 licenses. Thanks again very helpful stuff.

  10. Dave says:

    Kevin, it’s not really compensation, but rather the costs of duplicating and mailing. It’s a really low-volume product, and it takes a couple hours to cut the DVDs. So, add all that up and that’s where the $30/set (postpaid) comes from. Of course, if you have Internet service where you’re giving the class, you can just play them on YouTube for free. Good luck with your class! 73, Dave

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.